Air Plus brought a new point of view to Nurse Call Systems by its' rapid, safe and flexible structure.

Considered for running Hospitals, Private Clinics and Elderly Nursing Homes by easy installation feature.

Thanks for its' Plug & Play architecture.


  • Designed with “Plug and Play” architecture, ZKR Air introduce you with practical installation by leaving traditional installation methods aside.
  • Alarms received from the system can be forwarded in the form of written messages to pagers, DECT telephones, Wi-Fi mobile telephones or GSM phones.
  • With ZKR Air, while making communication between your patients and your personnel easier and faster, you will be able retrieve required reporting from the system and conduct performance analyses.
  • ZKR Air can be integrated into your current switchboard, therefore, you can start emergency code alarm by using internal phones from any points in the institution.

Bed Set Unit is used in the patient rooms. In an emergency, a patient uses the call button to make an emergency call which appears as a signal on the nurse console.  There are call and cancel buttons on the unit which are backlit and modern. Console is mounted on the patient headboard.


  • Thanks to user-friendly icons and ergonomic  handset design, it provides ease of use.
  • Maintenance-technical support free plug and play architecture.
  • Thanks to improvedlow power consumption, battery life up to 2 years.
  • High level performance with its built-in antenna.
  • Thanks to lighting control buttons on hand set, ability to  control reading and room lamps.
  • Thanks to RJ45 connection located on it, the unit allows connection to patient life support devices. In this way, the alarms received from life support unit are shared with relevant staff in real time.

Unit works though connection to bed set unit. Easy to notice with leds on the unit. Leds also show the last made call so the patient’s condition can be seen on the hand unit like the other warning unit. Light buttons help to control room lighting and reading lamp.


Wc Call Unit is used in the bathrooms of patient rooms. In an emergency, patient pulls the rope making an emergency call. Appears as a WC Emergency call on nurse console. System gives priority to WC Emergency calls and appears before other calls. There is a call reset button and emergency call rope on the unit. It’s backlit and modern.

Half-sphere shape makes it easy to notice. So if there is an emergency in the room it can be noticed easily. It warns with 5 different colors. The color depends on the call. Flush mounted above doors. If unsuitable can be mounted with surface mounted box.

  • Maintenance-technical support free plug and play architecture.
  • High level performance with its built-in antenna.
  • 3 different main colors (blue, green, red)
  • Ability to achieve different warning colors by mixing primary colors,
  • Very low energy consumption and environment  friendly thanks to its LED design.

In the case of an emergency, signal on the monitor icon will appear on the location and type of call. The system builds a priority depending on the call type and displays them on the monitor. All calls, emergency calls, toilet-bathroom and visiting nurses, can be tracked on the panel and remote access. IP - system is no limit on the number of beds connection. LAN based technology for the connection between units of the system. All kinds of transactions passing through the system are recorded. All records obtained can be reported in detail.

  • Linux Based System - Stable and well secured.
  • Showing 5 call at same time.
  • Call queue system
  • Priorty system for emergency calls.
  • Texting between panels.
  • Call orientation - Away from service area
  • Staff Card Authorization
  • Custom interface language
  • View local reports

This system is integrated with hospital PBX, nurse call panels, room control units and pager alarm system. It allows controlled access to patients’ information from nurse call room control by providing hospital management system or by integration with the used system and database. All nurse call panel send the notifications to this system for storing all events and provide a customized report as needed. By integration with hospital PBX, this system receives code blue call from any phone in hospital and announces it to pager system and nurse call system.

  • This system is Linux OS.
  • Recording server for Voice order.
  • WI-FI, DECT, IP phone integration.
  • Connected with hospital PBX using analogue, IP, BRI or PRI.
  • Warnings can be sent to DECT phones, pagers, mobile phones or phone lines.
  • Emergency Code server (code blue, code pink, code white, service code) can be started or via room control units or from any place using the hospital’s phones.
  • All transactions are recorded and can be reported as needed.
  • Connection types: SIP, H323, ISDN BRI, ISDN PRI and Analog.
  • Protocol: TCP/IP and ZKRUS Protocol
  • Paging protocol: POCSAG, Sipinfo and ESPA.